Capacity up to 200 trays depending on the design, chassis and customer requirements.
Sheathing with stacked sandwich panels.
Floor covering with moisture resistant bakelite plywood.
Corner of the body frame with aluminum corner 85x85 mm.
Bread bodies are designed for transporting confectionery and bakery products in special trays. Inside, they are divided into special compartments in which racks for trays are placed. The number of compartments depends on the body model, chassis type and customer needs. Our company offers a choice of several standard options for manufacturing and custom-made production.
A bread body of “improved” type is one of the most reliable options. As a wall material, stacked sandwich panels are used. Moisture resistant bakelite plywood can be as a floor covering. Also in this version, the frame with an aluminum corner 85×85 mm is provided.
Thanks to the design of the body, hot bakery products retain their consumer properties without being exposed to moisture. Besides, ventilation decorative grilles are provided for the organization of effective air circulation in a body. Classic vans are designed for 96, 128, 144, 180, 200 trays. Tray spacing may vary.
We have completed various variants of bread bodies, as well as a large number of calculations based on various types of chassis, including: Gazelle, Iveco,Isuzu, Ford, Peugeot, Citroen, etc. If you did not find the required chassis in this list, please contact the company’s managers, they will perform an individual calculation.
Технические характеристики
| Sheathing | sandwich panel |
| Subframe | steel or aluminum |
| Frame | frameless |
| Capacity | up to 200 trays |
| Doors | Single or double with seal |
| Door portal | stainless steel from 3 mm |
| Uploading | from the side/from the rear, each section with a separate entrance |
| Flooring | bakelite plywood / self-leveling floor |
| Quantity of compartments | from 3 to 6 |
| Protection of the case | aluminum corner 85×85 |
| Ventilation | natural or forced |
| Fittings | European production, made of stainless steel |
| Lighting | LED-lights |
| Additional | flanging, position and marker lights, side protection, a bump in the rear |
Capacity up to 200 trays depending on the design, chassis and customer requirements.
Sheathing with aluminum composite panels.
Floor covering with moisture resistant aluminum sheets.
A separate entrance is provided for each compartment with trays.
Bread bodies of “Standard” type – in this variant, sandwich panels used as the wall material, external and internal lining is made with galvanized sheet, it is possible to use bakelite plywood or galvanized sheets as a floor covering.
Технические характеристики
| Sheathing | aluminium-composite panels |
| Subframe | steel |
| Capacity | up to 200 trays |
| Doors | Single or double with seal |
| Door portal | stainless steel from 3 mm |
| Uploading | from the side/from the rear, each section with a separate entrance |
| Flooring | aluminum sheets |
| Number of compartments | from 3 to 6 |
| Ventilation | natural or forced |
| Fittings | European production, made of stainless steel |
| Lighting | LED-lights |
| Additional | position and marker lights, side protection, a bump in the rear |
Capacity up to 200 trays depending on the design, chassis and customer requirements.
Sheathing with metal sheets.
Floor covering with metal sheets.
A separate entrance is provided for each compartment with trays.
Bread body of “economy” type – the simplest and cheapest version. In this case, metal sheets are used as sheathing and flooring.
Технические характеристики
| Sheathing | steel sheets with polymer coating |
| Subframe | steel |
| Capacity | up to 200 trays |
| Doors | Single or double with seal |
| Door portal | stainless steel from 3 mm |
| Uploading | from the side /from the rear, each section with a separate entrance |
| Flooring | metal sheets |
| Number of compartments | from 3 to 6 |
| Ventilation | natural or forced |
| Fittings | European-made, stainless steel |
| Lighting | LED-lights |
| Additional | position and marker lights, side protection, a bump in the rear |