Sheathing with aluminum composite panels,framing corner with an aluminum profile 85x85 mm.
Floor covering with moisture resistant bakelite plywood or self-leveling floor.
Welded monolithic subframe construction made of steel or aluminum profiles.
Inside there is a tape for securing cargo, flanging and a lighting system.
The isothermal body is intended for transportation of foodstuffs, medicines and other materials for which it is constantly necessary to maintain a low temperature regime.
An isothermal body of “Improved” type is one of the best options due to the use of reliable materials. In the production of this type of bodies, aluminum composite panels are used as cladding, and a self-leveling floor or moisture-resistant bakelite plywood is used as a floor covering. It also provides for corner of the frame of the body with an aluminum profile 85×85 mm to protect against corrosion.
The design of the bodies is made in such a way that it has minimal heat loss, this is achieved by increasing the thickness of the walls and floor, and the material used for the interior lining also plays a big role.
When choosing an isothermal body, you should pay attention to several main points: the material of the internal and external walls, the thickness of the walls and floor, the design (frame or frameless) and the availability of additional equipment.
The production and sale of isothermal bodies in Ukraine is one of the main directions of our company, during our existence we have manufactured a large number of such vans based on Ford, Isuzu, Hyundai, Gazelle, Maz, KAMAZ, Tata and on a large number of vans with different parameters.
Specifications
| Cladding | aluminum composite panels |
| Platform | steel or aluminum |
| Floor covering | bakelite plywood/ self-leveling floor |
| Fittings | european production, made of galvanized steel |
| Lighting | a lamp with a switch at the entrance |
| Entrance | double back door and single door at the front with seal |
| Frame protection | aluminum profile 85×85 mm |
| Frame | steel |
| Thermal insulation | expanded polystyrene |
| Door portal | steel with a rubber bumper at the bottom |
| Flanging | on walls and doors, height from 200 mm |
| Additional | a retractable ladder, tape for securing cargo, side bumpers, position and marking lights |
29 June 2022
Завершено производство изотермического фургона и осуществлена передача клиенту
Производство изотермического фургона под заказ на базе грузового автомобиля Hyundai.
28 October 2021
Растет спрос на коммерческую технику на базе автомобилей DONGFENG.
Производство изотермического фургона на базе китайского автомобиля Dongfeng.
8 June 2021
Изотермический hyundai HD78 для перевозки лекарственных препаратов.
Производство изотермического фургона на Hyundai HD78 под заказ для перевозки лекарственных препаратов.
7 October 2021
Клиентам доступны решения для бизнеса на базе автомобилей китайских брендов.
Автомобили DongFeng с бортовой тентованной платформой и с изотермическим фургоном производства Polycar.
Sheathing with sheets of galvanized metal, framing corner with an aluminum profile 40x40 mm.
Flooring with moisture-resistant bakelite plywood or corrugated aluminum sheets.
Welded monolithic subframe construction made of steel profiles.
Flanging and lighting system inside.
Isothermal bodies of “standard” type- in this version, galvanized metal with a polymeric antibacterial coating is used as a sheating, flooring is moisture-resistant bakelite plywood. To protect against corrosion, it also provides for corner of the frame of the body with an aluminum profile 40×40 mm.
Specifications
| Sheathing | galvanized metal |
| Platform | steel |
| Flooring | bakelite plywood / aluminum |
| Fittings | european production, made of galvanized steel |
| Lighting | a lamp with a switch at the entrance |
| Entrance | double back door and single door at the front with seal |
| Frame protection | aluminum profile 40×40 mm |
| Frame | steel |
| Thermal insulation | expanded polystyrene |
| Door portal | steel with a rubber bumper at the bottom |
| Flanging | on walls and doors, height from 200 mm |
| Additional | a retractable ladder, side bumpers, position and marking lights |
Steel sheets are used as sheathing.
Floor covering with corrugated aluminum sheets.
Welded monolithic subframe construction made of steel profiles.
A lighting system inside is provided.
Isothermal bodies of “economy” type – the simplest version of this type of bodies. In this variant, steel sheets connected with rivets are used as sheathing, galvanized sheets laid on top of plywood are used as flooring.
Specifications
| Cladding | corrugated steel sheets |
| Platform | steel |
| Flooring | aluminum |
| Fittings | european production, made of galvanized steel |
| Entrance | double back door and single door in the front with a seal |
| Frame | steel |
| Thermal insulation | expanded polystyrene |
| Lighting | a lamp with a switch at the entrance |
| Door portal | steel, with a rubber bumper at the bottom |
| Additional | a retractable ladder, side bumpers, position and marking lights |